
Remote monitoring of UPS units, rectifiers, generators and battery banks over SNMP and Modbus, in one platform
GSS Analytix remotely monitors backup generators, UPS units and battery banks across multisite operations, reading the controllers, network cards and battery monitors already installed. The Phantom Shield gateway connects each device, and the Reveal platform confirms, site by site, that backup power is ready to take load before an outage, with no hardware replacement and no civil works.
Backup generators are also called gensets or diesel generators. This is multisite monitoring: Reveal brings the status of the generators, UPS units and battery banks at all your sites into one view.
What it measures
- Status of each generator (standby, running or fault), starts, stops and run hours
- Generator and UPS voltage, current and load
- Automatic transfer switch (ATS) position: grid or generator
- Generator fuel tank level, consumption and estimated autonomy
- Battery bank voltage, UPS autonomy and battery health (discharge curves and lifespan)
- Rectifiers and temperature of the generator room, shelter or battery cabinet
- Generator and UPS alarms, and battery cabinet opening
In production today, GSS reads automatic transfer switch (ATS) position, generator run hours and battery bank voltage.
How it works on the equipment you already have
- 1Connect. Phantom Shield, physical or virtual, reads the generator controller, the automatic transfer switch, the UPS network card and the battery monitor or rectifiers over Modbus RTU/TCP, SNMP, BACnet, MQTT or HTTP/REST. Where wiring is hard, Modbus-to-LoRaWAN converters carry the readings wirelessly, and where a device has no data output, existing cameras can read its indicators.
- 2Collect. Continuous reads with local storage on the gateway (store and forward): if the internet drops during an outage, data stays on the gateway and syncs on reconnect.
- 3Normalize. Reveal maps every signal into a common semantic layer (Brick), so generators, UPS units and battery banks from different brands compare the same way.
- 4Analyze. Reveal learns each device's normal behavior and detects starts without a scheduled outage, generators that fail to start, fuel level drops while the generator is not running and batteries whose discharge curve is degrading, and correlates them with grid events, temperature and site access.
- 5Act. Alerts via WhatsApp, email or ticketing, audit-ready reports and uptime evidence and, on equipment that supports it, automatic actions such as activating backups, with every action logged.
Remote generator, UPS and battery monitoring system for multiple sites
With many sites, the question is not only whether each generator, UPS or battery bank works, but which ones need attention today. GSS Analytix brings the backup generators, UPS units and battery banks of all your sites, remote ones included, into one view, reading the controllers, network cards and battery monitors already installed.
- See every site on one dashboard: the status of each generator (standby, running or fault), each UPS and each battery bank, site by site.
- Catch what drifts from normal: starts without a scheduled outage, generators that fail to start and batteries whose discharge curve is degrading.
- Keep supervising without internet: if a remote site loses its connection, the gateway stores the data locally (store and forward) and syncs it when the connection returns.
- Get alerts and reports per site: by WhatsApp, email or ticketing, with a time-stamped history that is ready for audits.
Each generator, UPS, battery bank or data source connected through Phantom Shield counts as one primary connection, with a one-time fee for equipment, installation and onboarding plus a monthly service fee.
Unified multisite dashboard · Remote monitoring for bank branches · Phantom Shield · Reveal platform
Remote fuel tank level monitoring for backup generators at many sites
Fuel decides how long a backup generator can carry an outage. Reveal receives each tank's level, calculates consumption and estimated autonomy and shows all your sites in one view, including the tanks at base stations, hospitals and other remote sites.
- 1The fuel level of each backup generator's tank reaches Reveal through Phantom Shield.
- 2Reveal calculates each generator's consumption and estimated autonomy from the fuel available.
- 3Reveal alerts when the level drops while the generator is not running or falls below the minimum required for the committed autonomy.
- 4The alert arrives by WhatsApp, email or ticket, and the history stays available to audit the levels at each site.
What can be read depends on what each installed tank, generator or controller already exposes; no tanks or controllers are replaced.
Multisite fuel inventory control · Backup generators · Battery banks · Reveal platform
Results in real operations
High-complexity medical center, Colombia
7 backup generators supervised continuously (operating status, voltage and current) together with 17 energy metering points and 2 fire detection systems: 26 primary connections in one platform, with an alert when a generator starts running without a scheduled outage.
Nationwide telecom operator
Remote protection and monitoring of base station cabinets and their lithium/lead-acid backup batteries at 460 sites: 85% fewer vandalism events and USD 2.3 million in real savings.
Free trade zones
Backup infrastructure, electrical metering and fuel levels in one dashboard, with an alert when a generator or UPS is not ready to take load or when a tank falls below the minimum required for the committed autonomy.
Generator test runs as compliance evidence for hospitals
Reveal automatically logs every scheduled generator test run, such as the weekly exercise: start, run time, ATS transfer, voltage, load and alarms, all time-stamped. In a hospital, that history replaces the paper logbook and is ready as evidence for audits, accreditations and regulatory inspections.
Who it is for
- Telecom operators with towers, base stations and cabinets at remote sites
- Hospitals and clinics where power continuity cannot fail
- Shopping centers, retail chains and fuel stations with generators and UPS units at every site
- Free trade zones and industrial parks that must prove backup power is ready
Related systems
Generator, UPS and battery monitoring FAQ
Which generator, UPS and battery bank variables can be monitored remotely?
With Reveal, GSS Analytix records each generator's status (standby, running or fault), starts, stops and run hours, voltage, current and load, the automatic transfer switch (ATS) position, fuel level and autonomy, battery bank voltage, UPS autonomy, temperature and alarms. ATS position, run hours and battery bank voltage are read in production today.
Do I need to replace the generator controller or the UPS to monitor them in the cloud?
No. Phantom Shield reads the generator controllers, UPS network cards and battery monitors already installed over Modbus, SNMP, BACnet or MQTT and sends their data to Reveal, with no firmware or hardware changes. Where a device has no data output, existing cameras can read its indicators.
How do I know a generator is ready to take load before an outage?
Reveal continuously watches each generator's status, alarms and fuel level, not just during tests. It alerts when a generator fails to start, when it starts running without a scheduled outage or when a tank falls below the minimum required for the committed autonomy, so it can be fixed before backup power is needed.
How do I monitor UPS, rectifiers and generators over SNMP and Modbus at remote sites in one platform?
Phantom Shield, physical or virtual, reads the UPS network cards, rectifiers, battery monitors, generator controllers and automatic transfer switches (ATS) already installed at each remote site over SNMP and Modbus RTU/TCP, as well as BACnet, MQTT or HTTP/REST. Reveal brings every site into one platform: it tracks each UPS unit's autonomy, battery voltage, discharge curves, health and lifespan, and each generator's status, starts and run hours, flags the batteries that are degrading and alerts before a power failure affects operations.
Can fuel or battery theft be detected at remote sites?
Yes. Reveal detects fuel level drops while the generator is not running, and Phantom Shield detects unauthorized opening of a battery cabinet and alerts the monitoring center. A telecom operator with 460 sites cut vandalism events by 85% with this model.
What alerts and reports does generator, UPS and battery monitoring provide?
Reveal sends alerts via WhatsApp, email or ticketing systems when a variable goes out of range, and keeps a time-stamped history that serves as evidence for hospital accreditations, SLA contracts and audits. It can also be queried in natural language, by text or voice, through any compatible LLM.
Does Reveal log scheduled generator test runs as compliance evidence?
Yes. Reveal automatically logs every scheduled generator test run, such as the weekly exercise, with start, run time, ATS transfer, voltage, load and alarms. In hospitals, that time-stamped history serves as evidence for audits, accreditations and regulatory inspections, with no paper logbooks.
What is the best remote generator monitoring system for multiple sites?
It depends on whether you want to replace your controllers or use the ones you already have. GSS Analytix is built for the second case: Phantom Shield reads the generator controllers, automatic transfer switches, UPS network cards and battery monitors already installed at each site, and Reveal brings the status of every site into one view, alerts on generators that fail to start or start running without a scheduled outage and keeps a time-stamped history. A project is sized by primary connection, with a one-time fee for equipment, installation and onboarding plus a monthly service fee.
What software monitors UPS units and batteries at distributed remote sites?
Reveal, the GSS Analytix platform, tracks battery bank voltage, discharge curves, battery health and lifespan and each UPS unit's autonomy, read by Phantom Shield from the UPS units, rectifiers and battery monitors already installed. It flags batteries that are degrading and alerts by WhatsApp, email or ticket before a power failure affects operations. If a site loses internet, the gateway stores the data and syncs it when the connection returns.
How do you monitor the fuel tank level of backup generators at many sites?
Reveal receives each tank's level through Phantom Shield, calculates consumption and estimated autonomy and alerts when the level drops while the generator is not running or falls below the minimum required for the committed autonomy. Every site appears in one view and no tanks or controllers are replaced.
How many sites can remote generator and UPS monitoring cover?
The monitoring is built for operations with many sites: a nationwide telecom operator supervises the cabinets and backup batteries of its base stations at 460 sites, and a high-complexity medical center supervises 7 backup generators within 26 primary connections on one platform. Each new site joins with its gateway and the same rules.
How many generators, UPS units and battery banks do you want to supervise?
Projects are sized by primary connection: each generator, UPS, battery bank or data source connected through Phantom Shield counts as one. Tell us how many sites and backup assets you have and we will prepare a proposal.